Other

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported

Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum. - Compatible with Trek Knock Block system - These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager) - 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

- The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. - The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. - This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated droppers posts

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details

The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key

- ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. - Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look. - 6061 T6 aluminum - Weight: 8g - Made in the USA

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake

Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.

Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Trek Part #282088 Notes: - Post on this hanger is 20mm (.825) in length with an M12 x 1.75 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x4 Socket Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 chainring bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring bolt